Peavey PV900 / PV 900 Power Amplifier


The new PV Series power amps retain their two-channel design, high power points and exclusive Peavey features and technologies-such as DDT compression and Peavey patented Turbo-V Cooling. The PV 900 delivers 300 watts per side into 4 ohms, 180 watts into 8 ohms and features detented input gain controls. It's a real workhorse
Here we have the best selling Peavey PV900 professional amplifier, in brand new un-opened or B-Stock. The B-Stock versions would have been on display at a training evening or trade exhibition only and will come boxed 'as new' with all accessories and a 1-year warranty. Buy this amazing Peavey PV900 with confidence from the UK's largest Peavey dealer with 100% satisfaction guaranteed or your money back
- PV 900 Features
- 2x450 watts at 2 ohms
- 2x300 watts at 4 ohms
- 2x180 watts at 8 ohms
- Massive toroidal transformer and storage capacitors
- Peavey patented Turbo-V cooling system with 2-speed demand-sensitive fan
- Built-in 150 Hz/18 dB/oct subwoofer crossover with TRS output
- DDT soft limiter protects amp and speakers
- 14 gauge steel chassis
- Rear rack supports
- Mil spec fiberglass circuit boards
- Current in-rush limiter
- Overheat, short circuit, clip limiting, DC, and faulty load protection
- Detent gain controls
- Neutrik Speakon and 5-way binding post outputs
- Power Output: 4 ohms 300w RMS / 600w program per channel
- Power Output: 8 ohms 180w RMS / 360w program per channel
- Power Output Bridge Mode: 8 ohms 600w RMS / 1200w program
- Minimum parallel speaker load: 2 ohms per channel or 4 ohms bridge
- 4 ohms per channel minimum or higher is recommended to maintain cooler temperature for sustained operation
- DDTTM COMPRESSION ++: Automatic, switchable with LED indicaton
- COOLING SYSTEM: Two-speed DC fan, air flow back to front
- LOW CUT FILTER ++: -3 dB @ 40 Hz, 12 dB per octave
- CROSSOVER ++: 150 Hz, 4-pole Linkwitz-Riley approximation
- INPUTS ++: Electronic balanced; Dual XLR or TRS 1/4" (6.3 mm) jack, Barrier Strip
- CROSSOVER OUTPUTS ++: Low/Thru and High, TS 1/4" (6.3 mm)
- AMPLIFIER OUTPUTS: Speakons for Chan A, Chan B and Bridge; Binding Posts
- LED INDICATORS ++: Red, DDT/clipping; Yellow, signal; Green, power
- AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load
- LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter
- DIMENSIONS: Height: 2 U rackmount 3.5" (8.9 cm), Width: 19" (48.3 cm), Depth: 15.5" (38.0 cm)
- WEIGHT: 18.2kg (40lbs)
There are currently no reviews for this product.
Be the first the write a review.
Product Description
The new PV Series power amps retain their two-channel design, high power points and exclusive Peavey features and technologies-such as DDT compression and Peavey patented Turbo-V Cooling. The PV 900 delivers 300 watts per side into 4 ohms, 180 watts into 8 ohms and features detented input gain controls. It's a real workhorse
Here we have the best selling Peavey PV900 professional amplifier, in brand new un-opened or B-Stock. The B-Stock versions would have been on display at a training evening or trade exhibition only and will come boxed 'as new' with all accessories and a 1-year warranty. Buy this amazing Peavey PV900 with confidence from the UK's largest Peavey dealer with 100% satisfaction guaranteed or your money back
Specifications
- PV 900 Features
- 2x450 watts at 2 ohms
- 2x300 watts at 4 ohms
- 2x180 watts at 8 ohms
- Massive toroidal transformer and storage capacitors
- Peavey patented Turbo-V cooling system with 2-speed demand-sensitive fan
- Built-in 150 Hz/18 dB/oct subwoofer crossover with TRS output
- DDT soft limiter protects amp and speakers
- 14 gauge steel chassis
- Rear rack supports
- Mil spec fiberglass circuit boards
- Current in-rush limiter
- Overheat, short circuit, clip limiting, DC, and faulty load protection
- Detent gain controls
- Neutrik Speakon and 5-way binding post outputs
- Power Output: 4 ohms 300w RMS / 600w program per channel
- Power Output: 8 ohms 180w RMS / 360w program per channel
- Power Output Bridge Mode: 8 ohms 600w RMS / 1200w program
- Minimum parallel speaker load: 2 ohms per channel or 4 ohms bridge
- 4 ohms per channel minimum or higher is recommended to maintain cooler temperature for sustained operation
- DDTTM COMPRESSION ++: Automatic, switchable with LED indicaton
- COOLING SYSTEM: Two-speed DC fan, air flow back to front
- LOW CUT FILTER ++: -3 dB @ 40 Hz, 12 dB per octave
- CROSSOVER ++: 150 Hz, 4-pole Linkwitz-Riley approximation
- INPUTS ++: Electronic balanced; Dual XLR or TRS 1/4" (6.3 mm) jack, Barrier Strip
- CROSSOVER OUTPUTS ++: Low/Thru and High, TS 1/4" (6.3 mm)
- AMPLIFIER OUTPUTS: Speakons for Chan A, Chan B and Bridge; Binding Posts
- LED INDICATORS ++: Red, DDT/clipping; Yellow, signal; Green, power
- AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load
- LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter
- DIMENSIONS: Height: 2 U rackmount 3.5" (8.9 cm), Width: 19" (48.3 cm), Depth: 15.5" (38.0 cm)
- WEIGHT: 18.2kg (40lbs)



Click on an image to enlarge






