Mackie Thump TH15A Active Speakers
Click on an image to enlarge
Here we have the Mackie Thump TH15A. Ever wondered why this speaker is nicknamed the 'Thump'? Probably because these outstanding cabinets feature a Class D Fast Recovery amplification system, which pushes 400 watts of power to the high-frequency compression driver and bass pounding 15" woofer. Plus, Mackie Active processing, including a precision crossover and driver time alignment provides total optimization for maximum system efficiency. Versatile by design, the TH15A features a user adjustable 3 band EQ for tone control and, since it can be pole-mounted or used as a wedge. Often compared to the SRM 450 V2 due to the TH 15A's extreme output quality, this speaker represents the best value available for a complete stage and PA solution.
Here we have the Mackie Thump TH15a Active speaker in brand new un-opened or b-stock. The b-stock versions would have been on display at a training evening only and will come boxed 'as new' with all accessories and a 1-year warranty. Buy these amazing Mackie Thump 15a powered speakers with confidence from the uk's largest Mackie UK dealer with 100% satisfaction guarranteed or your money back!
- ACOUSTIC PERFORMANCE
- Frequency Range -10 dB: 40 Hz - 20 kHz.
- Frequency Response -3 dB: 50 Hz - 18.5 kHz.
- Horizontal Coverage Angle: 90.
- Vertical Coverage Angle: 60.
- Maximum SPL Long-Term: 113 dB SPL @ 1m.
- Maximum SPL Peak: 116 dB SPL @ 1m.
- INPUTS / OUTPUTS
- Input: Female XLR Balanced/Unbalanced.
- Input Impedance: 20kOhms balanced bridging, 10 kOhms unbalanced.
- Loop-through: Male XLR Balanced/Unbalanced parallel with input.
- Level Control: Rotating knob, 0dB at center.
- Sensitivity: +4 dBu for full output, -36 dBu for full output.
- POWER AMPLIFIERS
- Low Frequency Power Amplifier:
- Rated Power: 150W, 8 Ohm load, 300W peak.
- THD: <0.1%.
- Signal-to-Noise Ratio: > -94 dB, 20Hz to 20kHz, unweighted, referenced to 138W into 8 Ohms.
- Design: Class D.
- High Frequency Power Amplifier:
- Rated Power: 50W, 4 Ohm load, 100W peak.
- THD: <0.1 %.
- Signal-to-Noise Ratio: > -97dB, 20Hz to 20kHz, unweighted, referenced to 50W into 4 Ohms.
- Design: Class AB.
- ELECTRONIC CROSSOVER
- Crossover Type: 24dB/octave.
- Crossover Frequency: 3kHz.
- EQUALIZATION
- Low Frequency EQ: 15dB @ 80 Hz, shelving.
- Mid Frequency EQ: 15dB, bandpass, sweepable from 100Hz to 8kHz.
- High Frequency EQ: 15dB @ 12 kHz, shelving.
- Direct/EQ Switch: Bypasses EQ section.
- PROTECTION CIRCUITRY
- Over-excursion Protection: Second-order sub-sonic filter.
- Thermal Protection: Independent amplifier shutdown, auto reset
- Driver Protection: Independent HF and LF compressors.
- CONSTRUCTION
- Design: Asymmetrical Trapezoidal.
- Material: Polypropylene.
- Finish: Textured .
- Handles: One on each side, one on top.
- Grille: Perforated metal with weather-resistant coating.
- Display LEDs: Front Power ON, Rear Power ON, OL overload.
- 400W of ultra-efficient Fast RecoveryTM amplification
- LF 300W peak power (Class-D)
- HF 100W peak power (Class A/B)
- High-output transducers
- 15" high-precision woofer
- 1" compression driver
- Mackie Active electronics provide total system optimization
- Precision 2-way crossover
- Transducer time-alignment
- User-adjustable 3-band contour EQ with sweepable mid-frequency
- Mic/Line input for direct connection of single microphone
- Tough, impact-resistant polypropylene enclosure
- Pole-mountable and floor wedge-able
- Extremely lightweight and portable (36 lbs)
- Dimensions: 27.1 x 16.8 x 11.7-inches.
- Weight: 36-pounds.
GOT A PAIR OF MACKIE THUMPS AND YES VERY VERY GOOD SOUND USED THEM AT TWO GIGS SO FAR NOT THE MOST POWERFUL 200 WATT RMS PER CAB GOOD FOR SMALLER VENUES,NICE AND LIGHT SO YES VERY HAPPY,BAD BIT IS THAT I DID NOT CHECK WHEN DELIVERED AND ONE HAD BEEN DROPPED AND HAS PUSH THE FOOT UP AND SLIT THE CASE SO NOT VERY STRONG BUT DO UNWRAP AND CHECK BEFORE YOU SIGN.I NEVER NOTICED THE SLIT AND PHONED WHYBUYNEW TWO WEEKS ON AND THEY CAN NOT HELP ME WISH I HAD CHECK. WHYBUYNEW ARE THE BEST PRICE ON THE NET FOR THE MACKIE THUMP.
Brought these, Not long ago - absolutely great, they look as if they were twice as much and sound as good to. Highly Recommended
MACKIE THUMP TH15A ACTIVE SPEAKERS
My wife and I host a soul duo performing in small to medium size venues across the UK. After 3 years in the business, using a whole range of active speakers, I can honestly say, nothing comes close to these TH15A. I would actually rate them alongside the SRM 350 V2s for reliability and kick. They are definitely nicknamed 'THUMP' for a reason. Brilliant.
Product Description
Here we have the Mackie Thump TH15A. Ever wondered why this speaker is nicknamed the 'Thump'? Probably because these outstanding cabinets feature a Class D Fast Recovery amplification system, which pushes 400 watts of power to the high-frequency compression driver and bass pounding 15" woofer. Plus, Mackie Active processing, including a precision crossover and driver time alignment provides total optimization for maximum system efficiency. Versatile by design, the TH15A features a user adjustable 3 band EQ for tone control and, since it can be pole-mounted or used as a wedge. Often compared to the SRM 450 V2 due to the TH 15A's extreme output quality, this speaker represents the best value available for a complete stage and PA solution.
Here we have the Mackie Thump TH15a Active speaker in brand new un-opened or b-stock. The b-stock versions would have been on display at a training evening only and will come boxed 'as new' with all accessories and a 1-year warranty. Buy these amazing Mackie Thump 15a powered speakers with confidence from the uk's largest Mackie UK dealer with 100% satisfaction guarranteed or your money back!
Specifications
- ACOUSTIC PERFORMANCE
- Frequency Range -10 dB: 40 Hz - 20 kHz.
- Frequency Response -3 dB: 50 Hz - 18.5 kHz.
- Horizontal Coverage Angle: 90.
- Vertical Coverage Angle: 60.
- Maximum SPL Long-Term: 113 dB SPL @ 1m.
- Maximum SPL Peak: 116 dB SPL @ 1m.
- INPUTS / OUTPUTS
- Input: Female XLR Balanced/Unbalanced.
- Input Impedance: 20kOhms balanced bridging, 10 kOhms unbalanced.
- Loop-through: Male XLR Balanced/Unbalanced parallel with input.
- Level Control: Rotating knob, 0dB at center.
- Sensitivity: +4 dBu for full output, -36 dBu for full output.
- POWER AMPLIFIERS
- Low Frequency Power Amplifier:
- Rated Power: 150W, 8 Ohm load, 300W peak.
- THD: <0.1%.
- Signal-to-Noise Ratio: > -94 dB, 20Hz to 20kHz, unweighted, referenced to 138W into 8 Ohms.
- Design: Class D.
- High Frequency Power Amplifier:
- Rated Power: 50W, 4 Ohm load, 100W peak.
- THD: <0.1 %.
- Signal-to-Noise Ratio: > -97dB, 20Hz to 20kHz, unweighted, referenced to 50W into 4 Ohms.
- Design: Class AB.
- ELECTRONIC CROSSOVER
- Crossover Type: 24dB/octave.
- Crossover Frequency: 3kHz.
- EQUALIZATION
- Low Frequency EQ: 15dB @ 80 Hz, shelving.
- Mid Frequency EQ: 15dB, bandpass, sweepable from 100Hz to 8kHz.
- High Frequency EQ: 15dB @ 12 kHz, shelving.
- Direct/EQ Switch: Bypasses EQ section.
- PROTECTION CIRCUITRY
- Over-excursion Protection: Second-order sub-sonic filter.
- Thermal Protection: Independent amplifier shutdown, auto reset
- Driver Protection: Independent HF and LF compressors.
- CONSTRUCTION
- Design: Asymmetrical Trapezoidal.
- Material: Polypropylene.
- Finish: Textured .
- Handles: One on each side, one on top.
- Grille: Perforated metal with weather-resistant coating.
- Display LEDs: Front Power ON, Rear Power ON, OL overload.
- 400W of ultra-efficient Fast RecoveryTM amplification
- LF 300W peak power (Class-D)
- HF 100W peak power (Class A/B)
- High-output transducers
- 15" high-precision woofer
- 1" compression driver
- Mackie Active electronics provide total system optimization
- Precision 2-way crossover
- Transducer time-alignment
- User-adjustable 3-band contour EQ with sweepable mid-frequency
- Mic/Line input for direct connection of single microphone
- Tough, impact-resistant polypropylene enclosure
- Pole-mountable and floor wedge-able
- Extremely lightweight and portable (36 lbs)
- Dimensions: 27.1 x 16.8 x 11.7-inches.
- Weight: 36-pounds.
01206 855010 | 
