01206 855 010

Linn Axis with Basik Plus Arm And Linn K9 Cartridge

Send to a friend
print
Click on the image to enlarge Click on the image to enlarge
Linn Axis with Basik Plus Arm And Linn K9 Cartridge
Linn Axis with Basik Plus Arm And Linn K9 Cartridge
Linn Axis with Basik Plus Arm And Linn K9 Cartridge
Linn Axis with Basik Plus Arm And Linn K9 Cartridge
Linn Axis with Basik Plus Arm And Linn K9 Cartridge
Linn Axis with Basik Plus Arm And Linn K9 Cartridge
Linn Axis with Basik Plus Arm And Linn K9 Cartridge
Linn Axis with Basik Plus Arm And Linn K9 Cartridge
£459.00
Sold Out  Sold Out
Earn 4590 points [?]
Quantity
Email me when stock arrives
Price Beat Guarantee | We'll beat any price!
Why not Part Exchange?
cards
Product Description

This amazing Linn Axis with Basik Plus Arm And Linn K9 Cartridge has come to us via a part exchange and comes with a 3 month warranty.

It has been tested and is in full working order.

This item is in very good cosmetic condition.

This beautiful item comes with Basik Plus Arm And Linn K9 Cartridge comes with a Basik arm mounted, with a linn K9 cartridge and stylus.

This Linn Axis with Basik Plus Arm And Linn K9 Cartridge comes in its original box and packaging with the manual, power cord and connected phono lead included.

The Axis is a precision built, twin speed (33.3 rpm and 45 rpm) transcription turntable. It is mounted in a black veneered medite plinth, with a dark grey top -board and equipped with a moulded, hinged dustcover.

Specification:

Platter
12” diameter (305mm) aluminium diecast and accurately machined on all matching and visible surfaces. Weight approximately 1.5kg. The platter is supplied with a felt mat.

Bearing
Single point system running in an oil bath. The thrust pad which must support the weight of the platter on a single point is top grade steel, machined, hardened, ground and lapped to a mirror finish.

Motor
24-pole precision synchronous low noise, high torque motor. Fully shielded and mechanically isolated from the main bearing assembly by resilient mounting and a damped, uniquely designed suspension system.

Speeds
33.3 rpm and 45 rpm. Speed accuracy =0.1%

Motor Power Supply
Linn-designed 2-speed electronic ‘Class A’ power supply incorporating a stall detect circuit. This monitors the load on the motor from start-up and reduced the power supply to the motor once the correct speed has been achieved. It will also increase the power to the motor as required. When this happens the relevant LED on the switch will brighten to show increased power, and dim once power is reduced. Easily changed (internally) from 110V to 240V and will run on 50Hz or 60Hz without modification.

Suspension
Three silicone, custom moulded rubber mounts, providing isolation for both the turntable/arm from the motor/plinth, and the feet from the plinth. Easily adjusted to keep record platform level.

Drive
Flat, precision ground neoprene rubber belt driven by a concentric drive pulley; concentricity 0.01mm.

Top-plate
Heavy medite wood, laminated on both sides.

Power Consumption
8 Watts

Dimensions
W 445mm x D 349mm x H 140mm
With lid open 400mm high

Product Reviews

There are currently no reviews for this product.

Be the first the write a review.

Facebook Comments
You may also like...