01206 855 010

Pioneer SX-636 Stereo Receiver

Send to a friend
Click on the image to enlarge Click on the image to enlarge
Pioneer SX-636 Stereo Receiver
Pioneer SX-636 Stereo Receiver
Pioneer SX-636 Stereo Receiver
Pioneer SX-636 Stereo Receiver
Pioneer SX-636 Stereo Receiver
Pioneer SX-636 Stereo Receiver
Pioneer SX-636 Stereo Receiver
Sold Out  Sold Out
Earn 999 points [?]
Email me when stock arrives
Price Beat Guarantee | We'll beat any price!
Why not Part Exchange?
Product Description

This Pioneer SX-636 Stereo Receiver has come to us via a part exchange and comes with a 3 month warranty.

It has been tested and is in working order however the signal level is not moving properly.

The item is in poor cosmetic condition with small marks on the top and age related marks on the front and sides. The wooden plynths are chipped on the corners and frayed.

This Pioneer SX-636 Stereo Receiver does not include original packaging but has been professionally packaged to ensure safe delivery to your door.

Not all high fidelity situations require high powered equipment.

If your listening room is of average size, and what you really want is more efficiency and more sophisticated versatility in a medium-powered model, Pioneer's new SX-636 will be a good choice.

It incorporates the latest state-of-the-art advantages for superior high fidelity performance. But it saves you money and doesn't waste watts.

The FM tuner employs a low-noise FET and a frequency-linear 3-gang variable capacitor in the front end. The FM IF section features a 5-stage limiter of high-performance IC and phase-linear ceramic filters. And to ensure stability under all operating conditions, the FM MPX circuit is the advanced PLL (Phase-Lock-Loop) type with an IC.

FM results are impressive: 1.9pV (IHF) sensitivity, capture ratio of 1.0dB (IHF), 60dB selectivity (IHF), signal-to-noise ratio of 70dB and wide separation of more than 30dB over the 50 to 10,000Hz range.

Accurate high fidelity reproduction is achieved with a particularly precise phono equalizer in the Pioneer SX-636. It keeps RIAA deviation within +- 0.5dB.

And as for power, the advanced direct-coupled OCL power amplifier provides continuous power output of 25 watts per channel, min RMS
at 8 ohms from 20 Hertz to 20,000 Hertz with no more than 0.5% total harmonic distortion.

This is enough to drive up to two pairs of stereo speaker systems independently or simultaneously with brilliant, high fidelity results.

As a stereo control center the SX-636 is up to the minute - there are two stereo pairs of tape terminals (deck 1 to deck 2 tape duplication is possible), a function switch to handle FM, AM PHONO, MIC and AUX. An FM-linear dial scale with dual meter tuning system, illuminated program indicators, a stereo headphone jack and other conveniences add to the versatility.

The efficient Pioneer SX-636 puts stereo power in its place - with no wasted watts or wasted money for your stereo pleasure.


  • Tuning range: FM, MW
  • Power output: 25 watts per channel into 8? (stereo)
  • Frequency response: 20Hz to 30kHz
  • Total harmonic distortion: 0.5%
  • Damping factor: 35
  • Input sensitivity: 7mV (mic), 2.5mV (MM), 150mV (DIN), 150mV (line)
  • Signal to noise ratio: 65dB (mic), 70dB (MM), 90dB (line)
  • Output: 150mV (line), 30mV (DIN)
  • Speaker load impedance: 4? (minimum)
  • Semiconductors: 1 x FET, 3 x IC, 33 x transistors, 17 x diodes
  • Dimensions: 480 x 147 x 405mm
  • Weight: 11.2kg
Product Reviews

There are currently no reviews for this product.

Be the first the write a review.

Facebook Comments
You may also like...