LEDJ Slimline 7Q5 RGBW (White Housing) x4 with DMX Cables
Bringing to this LEDJ Slimline 7Q5 RGBW with DMX lighting cables to give you this wonderful lighting bundle. The perfect solution to brighten up your dancefloor with an array of colours in a compact lighting system. This package contains:
Here we have the LEDJ Slimline 7Q5 RGBW with white housing. This LED wash/par effect is perfect for a number of mobile and installation applications including mobile DJs, bands, bars, clubs and installation in other venues. Each fixture is powered by seven 5watt RGBW LEDs. These quad-colour LEDs offer on-board, solid state colour mixing with a 400Hz refresh rate for ultra-smooth colour transitions. Thanks to superior 4-colour mixing, a seemingly endless number of colours can be generated from background hues to bright, vivid shades.
The 7Q5 can be controlled with the optional wireless I.R controller or with any standard DMX controller across 2, 3, 4 or 7 channels. 7Q5 can also be run in sound-active or automatic modes where it cycles through its' series of inbuilt sequences either at a constant pace or in time with your music. 7Q5 can also be set on a static colour or to change/fade between colours at a constant rate. The use of LED technology holds several key advantages over traditional and halogen lamps. LEDs run very cool which is perfect for uplighters which may be left on and unattended all night with no duty-cycle. LEDs have a lamp life of approximately 50,000 hours meaning an end to mid-event failures and time-consuming lamp changes. Finally, thanks to a low power-draw, several LED fixtures can be run from a single mains supply with the 7Q5 having IEC in/out to 'daisy-chain; fixtures.
LEDJ Slimline 7Q5 RGBW Features:
- 7 x 5W quad-colour LEDs (RGBW)
- Beam angle: 25 degrees
- 400Hz refresh rate
- 0 - 100% dimming with variable strobe
- DMX channels: 2/3/4 or 7 selectable
- Static colour, colour change, colour fade, auto run, sound active, master/slave and DMX
- 4 push button menu with LED display
- Optional I.R. remote (LEDJ90C)
- 3-pin XLR in/out sockets
- IEC Power in/out sockets
- Convection cooled
DMX Cable Features:
- Budget solution
- Twisted core for reduced noise reduction
- For DMX-control or master/slave connection
- Male - Female Lead
There are currently no reviews for this product.
Be the first the write a review.