Alto TS315 (Pair) & Alto TS215S (Pair) Package

This excellent value Alto speaker package comes equipped with:
- 2x Alto TS315 PA Speakers
- 2x Alto TS215S Subwoofers
- 2x Satellite Speaker Poles
- 4x 6m Male XLR to Female XLR Cables
Alto TS315
The Alto TS315 is the flagship speaker of the new Alto TS3 series of active powered PA speakers. Featuring a 15" woofer and 1.4" tweeter this professional speaker will deliver in any application you'll need it for. Best suited for clubs, bars, mobile DJ's and conference halls, the Alto TS315 is a versatile and powerful speaker that delivers excellent sound. A must buy for anyone looking for a 15" PA speaker!
The all-new Alto Professional TS3 Series of professional loudspeakers deliver solutions for every performance and installation challenge. With 2000 watts of explosive bi-amplified power and newly-designed transducers, these speaker systems deliver truly high-performance audio, without compromise or restriction. Their elegant industrial design, lightweight but rugged construction, versatile mounting/placement application and intuitive user interface achieves a level of excellence and refinement that exceeds expectations.
Alto TS215S
The Alto TS215S is a powered subwoofer with an output peak power of 1250W and can be paired with any full-range speaker system for maximum sound impact. The TS215S is suitable for mobile DJs, touring musicians and club/bar installation.
For those performance situations where additional low-frequency output and punch are required, even beyond the already-impressive bass capability of the TS2 full-range speakers, the new TS2 powered subwoofers are the perfect solution.
Alto TS315 Features
- 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
- 15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
- 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
- Pole-mountable, wedge monitor, bracket installation or flown application with integral M10 suspension points
- Integrated 2-channel mixer with dual XLR ¼-inch combo mic/line inputs, independent level controls, XLR Link output, Contour
- EQ switch and Ground-Lift switch
- Custom engineered high-efficiency class D amplifiers with passive cooling design No fan means the speaker runs cleaner, quieter and has greater long-term reliability
- Designed and tuned in the USA
Alto TS315 Specifications
- Output Power: 2000 W peak (1300 LF + 700 HF) 1000 W continuous RMS (650 LF + 350 HF)
- LF Driver: 15-inch (381 mm) LF driver, 3-inch (76 mm) high-temperature voice coil
- HF Driver: 1.4-inch (35 mm) neodymium magnet HF driver with precision wave guide
- Crossover: 2 kHz
- Maximum SPL: 134 dB peak, 131 dB continuous (dB SPL @ 1 m)
- Frequency Response: 5020 kHz (+/- 3 dB)
- Frequency Range: 43 Hz22 kHz (-10 dB)
- Horn Coverage: 90° H x 60° V nominal
- Equalization: Contour Switch Low and High Frequency +3dB Boost
- Connectors: (2) XLR/TRS ¼ (6.35 mm) combo inputs, (1) XLR link output, (1) IEC power cable input
- Controls: (2) Volume, Power on/off switch, Contour switch, Ground-Lift switch
- Indicators: 2 x Power LED (front and rear), Clip limiter LED
- Protection: Electronic clip, Thermal and transducer overdrive protection
- Power Connection: IEC with Mains Fuse
- AC Voltage Input: 100,110-120,220240 V, 50/60 Hz
- Enclosure: Trapezoidal, injection-molded, polypropylene enclosure, with perforated steel grille
- Mounting/Installation: 36 mm standard pole mount, Wall or ceiling mount using TSB125 bracket, Flown application with integral
- M10 suspension points, Wedge monitor
- Dimensions (HxWxD): 25.7 x 16.6 x 15.4 / 652mm x 421mm x 392mm
- Net Weight: 41.3 lbs. / 18.8 kg.
Alto TS215S Features
- 1250 watts of peak power output
- Custom engineered high-efficiency Class D amplifiers with passive cooling design - no fan means the speaker runs cleaner, quieter and has greater long-term reliability
- 15-inch high-excursion woofer
- (2) XLR+1/4-inch combo inputs + (2) balanced XLR line outputs
- Polarity Reverse, Full-Range Output and Extended LF controls
- Electronic clip, thermal and transducer overdrive protection
- Rugged, internally-braced front-ported plywood cabinet
- Integrated 35mm speaker pole socket and M10 rigging points
Alto TS215S Specifications
- Output Power: 1250 W peak, 625 W continuous
- Transducer Low: 15" (381 mm) woofer, 3" (76 mm) voice coil
- Frequency Response: 35-95 Hz (-10 dB)
- Maximum SPL: 129 dB (@ 1 m)
- Connections: (2) XLR+1/4" (6.35 mm) inputs; (2) XLR outputs; (1) IEC power cable input
- Input Level: Line -4 dBu (nominal)
- External Controls: Volume control, signal/clip limiter with LED, polarity-reverse switch, high-pass filter bypass switch with LED, extended low-frequency switch with LED, power switch with LED
- Electronic Protections: Electronic clip, thermal and transducer overdrive protection
- Enclosure: Internally braced plywood cabinet; 35 mm mounting pole socket ontop panel
- Power Connection: Standard IEC cable
- Input Voltage: 110-120, 220-240 V AC; 50/60 Hz
- Consumption: 450W
- Fuse: T6.3AL AC250V (110-120 V) or T3.15AL AC250V (220-240 V)
- TS215S Dimensions (W x D x H): 21.34" x 20.3" x 24.8" / 542 x 515 x 630 mm
- TS215S Weight: 62 lbs. / 28.2 kg